Why Your Warm-Up Is Sabotaging Your Performance (And What to Do Instead) | The Resilience Lab
Blogs > Performance

Why Your Warm-Up Is Sabotaging Your Performance (And What to Do Instead)

Dr. Reed Jarvis, DC ·Owner & Chiropractor, The Resilience Lab ·Jun 9 ·5 min read
Drop a photo here, or save it as assets/blog/warm-up.avif
Why Your Warm-Up Is Sabotaging Your Performance (And What to Do Instead)

Most people warm up the same way they learned in gym class. A few minutes on the treadmill, some static stretching, maybe a couple arm circles, and then straight into the workout. It feels responsible. It feels like preparation. The problem is the research is pretty clear that this approach is not only ineffective, it may actually be making you perform worse. Here's what the evidence actually says and what a warm-up that actually prepares your body looks like.

The problem with static stretching before training

Static stretching, the kind where you hold a position for 20 to 60 seconds, has been the default pre-workout routine for decades. The idea was that lengthening the muscle before activity would reduce injury risk and improve performance. The research has largely dismantled that assumption.

A large body of evidence now shows that prolonged static stretching performed immediately before exercise can acutely reduce muscle strength and power output. The mechanism is straightforward: holding a stretch for an extended period temporarily reduces the stiffness and neural activation of the muscle, which is the opposite of what you want heading into a training session. You need your muscles to be responsive, loaded, and ready to contract forcefully. Static stretching before activity works against that.

Static stretching is not bad. The issue is timing. Doing it immediately before you need to perform is where the problem lives.

To be clear, static stretching has real value for improving long-term flexibility and range of motion when done consistently, particularly after training or on its own. Keep it. Just move it to the end of the session, or to its own slot on a rest day.

What a proper warm-up actually does

A good warm-up serves a specific set of physiological purposes. It raises core body temperature, increases blood flow to working muscles, improves joint lubrication, activates the nervous system, and rehearses the movement patterns you're about to perform under load. None of that happens from standing still and holding a stretch.

A proper warm-up prepares your body to move and produce force. It bridges the gap between rest and full output so that when you get to your first working set, your body is already operating close to what you're about to demand of it.

Static stretching vs. dynamic warm-up

Both have a place. The difference is what each one does to a muscle in the minutes immediately after you finish.

Static stretching before training
Dynamic warm-up
Static stretching before trainingHolds a position 20–60 seconds at end range
Dynamic warm-upMoves through range repeatedly, building in intensity
Static stretching before trainingAcutely reduces strength and power output
Dynamic warm-upMaintains or improves force production
Static stretching before trainingTemporarily lowers muscle stiffness and neural drive
Dynamic warm-upRaises muscle temperature and neural activation
Static stretching before trainingLittle effect on core temperature or blood flow
Dynamic warm-upRaises core temperature and blood flow to working tissue
Static stretching before trainingNo rehearsal of the movement you are about to do
Dynamic warm-upRehearses the exact patterns under progressive load
Static stretching before trainingBest used after training or on its own
Dynamic warm-upBest used immediately before training

What an effective warm-up looks like

Work through these in order. The whole sequence takes 10 to 15 minutes and each stage sets up the next.

1

Raise temperature — 3 to 5 minutes

Easy cycling, rowing, brisk walking, or skipping. The goal is a light sweat and an elevated heart rate, not fatigue. You should be able to hold a conversation throughout.

2

Mobilize the joints you are about to load — 3 to 4 minutes

Controlled movement through full range for the hips, ankles, thoracic spine, and shoulders as relevant to the session. Think leg swings, hip circles, deep squat holds with movement, thoracic rotations. Move in and out of range rather than holding.

3

Activate what has been switched off — 2 to 3 minutes

Glute bridges, band walks, scapular work, dead bugs. Short and deliberate. This wakes up the stabilizers that tend to stay quiet after a day of sitting, so the big movers do not have to cover for them.

4

Rehearse the movement, building load — 3 to 5 minutes

Ramp sets of the actual lift or drill. Empty bar, then progressively heavier sets with low reps. For running or sport, this is strides and change-of-direction work at increasing speed.

5

Prime the nervous system — 1 to 2 minutes

A few short, sharp efforts: jumps, medicine ball throws, or a brief sprint. Low volume, full intent. This is what closes the gap between warm and ready.

The role of movement quality in your warm-up

One thing most people skip entirely in their warm-up is paying attention to how they're actually moving. If you have a restriction in hip mobility, a tight thoracic spine, or a muscle that's not activating properly, going straight from a basic warm-up into heavy loading doesn't fix those issues. It works around them, and over time that's how overuse injuries develop.

A well-designed warm-up includes a brief awareness check of the areas most relevant to that day's training. Not a full assessment, just enough to notice if something isn't moving the way it should before you start loading it. If your hip doesn't want to go into full range during your warm-up, it's not going to cooperate better under a barbell.

This is also where chiropractic care and functional rehab connect directly to performance. Restrictions that show up in your warm-up don't resolve by warming up harder. They resolve by addressing the underlying dysfunction, which is exactly what we work on in the treatment room.

How long should a warm-up actually be

There's no universal answer, but the research generally supports warm-ups in the range of 10 to 20 minutes for most training contexts. The more demanding the session, the more preparation your body needs. A heavy squat session or a speed and power workout requires a more thorough warm-up than a moderate aerobic session. A competition day warm-up should be longer and more specific than a general training day.

The goal is arriving at your first real effort already operating close to your ceiling, not climbing toward it during the first few sets while your body catches up.

Keep reading

Movement

Why Movement Quality Matters More Than Movement Volume

Injury & Pain

What's Actually Driving Your Knee Pain

Recovery

The Difference Between Resting an Injury and Recovering From One

Louisville, TN - theresiliencelabtn.com

Something not moving the way it should?

If a restriction keeps showing up in your warm-up, that's worth assessing. Book an appointment and we'll find out what's driving it.

Book Appointment All Posts